{"product_id":"fuel-pulse-damper-direct-mount-kits","title":"Fuel Pulse Damper, Direct Mount Kits","description":"\u003cdiv class=\"about__accordion-toggle active\"\u003e\n\u003ch3 class=\"about__accordion-h3\"\u003eOVERVIEW\u003c\/h3\u003e\n\u003cp class=\"about__accordion-h3\"\u003eThe opening and closing of fuel injectors creates pressure pulses in the fuel rail; this can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help idle surge, especially with high flow injectors. Furthermore, a fuel pulse damper can help solve erratic lean air\/fuel ratio spikes, commonly experienced as 'stumbling', that are difficult to tune out.\u003cbr\u003e\u003cbr\u003eFuel pulse dampers can be mounted at any angle, including upside down. There are many variables that dictate if a fuel system requires fuel pulse dampers. For instance, there are cases where multiple dampers are necessary. There are also other times when the fuel system benefits with a fuel pulse damper on the return line.\u003c\/p\u003e\n\u003cp class=\"about__accordion-h3\"\u003eThis product is safe for use with all fuel types including alcohol blends such as E85.\u003c\/p\u003e\n\u003ch4 class=\"about__accordion-h3\"\u003e20-0776 FPD-R 8AN ORB\u003c\/h4\u003e\n\u003cp class=\"about__accordion-h3\"\u003eStandard Operating Range: 40-70psi\u003c\/p\u003e\n\u003cp class=\"about__accordion-h3\"\u003eStandard operating range should be used on vehicles with a base fuel pressure between 40-70psi. If fuel pressure is static (does not fall or rise with manifold pressure) then no vacuum reference line is needed. If fuel pressure rises or falls lower or higher than the operating range, a vacuum line is needed\u003c\/p\u003e\n\u003ch4 class=\"about__accordion-h3\"\u003e20-0777 FPD-XR 8AN ORB\u003c\/h4\u003e\n\u003cp class=\"about__accordion-h3\"\u003eExtended Operating Range: 40-105psi\u003c\/p\u003e\n\u003cp class=\"about__accordion-h3\"\u003eExtended operating range should be used on vehicles with a base fuel pressure above 70psi and up to 105psi. If fuel pressure is static (does not fall or rise with manifold pressure) then no vacuum reference line is needed. If fuel pressure rises or falls lower or higher than the operating range, a vacuum line is needed.\u003c\/p\u003e\n\u003cdiv class=\"about__accordion-toggle-icon\"\u003e\u003csvg class=\"icon icon-minus\" width=\"14\" height=\"3\" viewbox=\"0 0 14 3\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M6 0.5H8H14V2.5H8H6H0V0.5H6Z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"about__accordion-description\"\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e20-0178 FPD-R 3\/8\" NPT\u003c\/h4\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eStandard Operating Range: 40-70psi\u003c\/p\u003e\n\u003cp\u003eStandard operating range should be used on vehicles with a base fuel pressure between 40-70psi. If fuel pressure is static (does not fall or rise with manifold pressure) then no vacuum reference line is needed. If fuel pressure rises or falls lower or higher than the operating range, a vacuum line is needed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e20-0179 FPD-XR 3\/8\" NPT\u003c\/h4\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eExtended Operating Range: 40-105psi\u003c\/p\u003e\n\u003cp\u003eExtended operating range should be used on vehicles with a base fuel pressure above 70psi and up to 105psi. If fuel pressure is static (does not fall or rise with manifold pressure) then no vacuum reference line is needed. If fuel pressure rises or falls lower or higher than the operating range, a vacuum line is needed.\u003c\/p\u003e\n\u003ch3\u003eHOW TO CHOOSE BETWEEN FPD-R VS FPD-XR\u003c\/h3\u003e\n\u003cp\u003eThe FPD-R (Standard Range) and FPD-XR (Extra Range) both have unique base\/static fuel pressure requirements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFPD-R base pressure requirement = 40 - 70psi (static)\u003c\/li\u003e\n\u003cli\u003eFPD-XR base pressure requirement = 40 - 105psi (static)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eBase pressure is the fuel pressure measured when the fuel pump is running WITHOUT a vacuum line connected to the regulator.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eYou should choose the damper that has a range that covers your base fuel pressure. If your base fuel pressure does not exceed 70psi, there is usually no advantage to using the extra range unit. The exception to this would be if your rising rate pressure exceeds 70psi, but never exceeds 105psi, and your falling rate under vacuum never moves under 40psi. In this scenario, the extra range damper would allow you to run without a vacuum line where the standard would require one.\u003c\/p\u003e\n\u003cdiv class=\"image-with-alt-overlay\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe ranges above are base static fuel pressures only. Any dynamic fuel pressure created by a rising-rate FPR outside of this range is acceptable, but only when the base \"static\" fuel pressure is set within these ranges and the vacuum\/boost reference line is connected.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003eExample 1\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMitsubishi EVO\u003cbr\u003e\u003cstrong\u003eOEM Base Static Fuel Pressure:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e43.5psi\u003cbr\u003e\u003cstrong\u003eBoost Pressure:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e30psi\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003cstrong\u003eRising Rate Pressure Regulator?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYes\u003cbr\u003e\u003cstrong\u003eCan I use a FPD-R?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYes. Even though fuel pressure is 73.5psi at full boost and could be less than 40psi under vacuum, the FPD-R will work because the base static pressure was set within the 40-70psi requirement. However, the vacuum\/boost reference line must be installed. \u003cbr\u003e\u003cstrong\u003eCan I use a FPD-XR?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYes. Also, the vacuum\/boost reference line does not need to be installed since maximum fuel pressure does not exceed 105psi, but may need to be connected since it could fall under 40psi in vacuum.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003eExample 2\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBMW E46 M3\u003cbr\u003e\u003cstrong\u003eOEM Base Static Fuel Pressure:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e72.5psi\u003cbr\u003e\u003cstrong\u003eBoost Pressure:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e20psi\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003cstrong\u003eRising Rate Pressure Regulator?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYes\u003cbr\u003e\u003cstrong\u003eCan I use a FPD-R?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo. Base static fuel pressure exceeds the 40-70psi requirement.\u003cbr\u003e\u003cstrong\u003eCan I use a FPD-XR?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYes. Also, the vacuum\/boost reference line does not need to be installed since maximum fuel pressure does not exceed 105psi and won't fall under 40psi in vacuum.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is supplied to order through manufacturer\/suppliers.\u003cbr data-end=\"530\" data-start=\"527\"\u003ePlease allow 2–5 business days for processing before dispatch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0776 FPD-R 8AN ORB","offer_id":45318781534387,"sku":"20-0776","price":178.0,"currency_code":"AUD","in_stock":true},{"title":"20-0178 FPD-R 3\/8NPT","offer_id":45318781567155,"sku":"20-0178","price":178.0,"currency_code":"AUD","in_stock":true},{"title":"20-0777 FPD-XR 8AN ORB","offer_id":45318781599923,"sku":"20-0777","price":198.0,"currency_code":"AUD","in_stock":true},{"title":"20-0179 FPD-XR 3\/8NPT","offer_id":45318781632691,"sku":"20-0179","price":198.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9127\/3139\/files\/20-0776_3e44bdbc-05cd-4de7-8a5c-1fb46e54a6b7.webp?v=1772470664","url":"https:\/\/velocity-performance-lab.com\/products\/fuel-pulse-damper-direct-mount-kits","provider":"Velocity Performance Lab","version":"1.0","type":"link"}